 HomeNewsHow can silicone product manufacturers avoid stains in products

How can silicone product manufacturers avoid stains in products

2022-08-06

Silicone product factory is actually quite difficult sometimes. For example, some products have strict and harsh requirements, especially the built-in ones that cannot have stains or impurities. This is a quality problem that cannot exist for silicone gifts, and it is necessary to solve this problem. There are also difficulties in saying it is difficult, but also pay attention to simplicity! Today, the author of Huayuan will take you to solve this difficulty, and provide some experiences for reference only. If you have a better way, welcome to discuss!

First of all, it is necessary to understand how there are stains and impurities in silicone products, which will greatly affect the quality and appearance requirements of the products. This is an inappropriate product for buyers, and becomes waste products for silicone products manufacturers. How to avoid This seems to be a small problem. I think many manufacturers have done a lot of work in this area. Some have succeeded and some have failed. In fact, to solve this small problem, it mainly depends on the personnel. make.

First of all, what should be done on personnel? Naturally, this is training. The so-called corporate culture and concept must have. If the quality concept is not unified or even absent, then things will definitely not be done well. Therefore, the training of personnel should also be reduced. Make some effort to make them have the concept of quality! Don't blindly pursue speed! Pay attention to the problem of blemishes in every link.

Secondly, in the first step of equipping materials, it is also necessary to check whether there are impurities in the materials when the materials are supplied. If the raw materials are not checked, the probability of impurities in them will be greatly increased. After checking the raw materials, when mixing and toning Employees also need to pay special attention to the problem of impurities. First of all, the top of the rubber mixing machine should be kept clean, and various cleaning tasks should be used to clean or clean the machine to prevent dust and small impurities that are invisible to the naked eye!

After the rubber mixing machine is cleaned, carefully check whether the color masterbatch is clean when toning, and there must be no dust impurities in it, especially the color masterbatch is very difficult to see because of its color. This is a careful job. It should be done carefully. After the completion of the raw material work, pay attention to one point in the actual production of the vulcanizing machine, that is, the cleaning of the mold and the influence of the working environment. Silicone products are generally completed by molds and vulcanized silicone. The working environment There should be no wind in the air, and the air should be kept as clean as possible without dust, because it is easy for the dust in the air to intervene in the raw materials, so it is difficult to think of the beautiful appearance of silicone products, which is also a More important part of attention! Pay attention to the cleanliness of the countertop during subsequent manual operations.

Afterwards, silicone product manufacturers should also pay attention to packaging when shipping, and use good small packages and outer cartons to seal tightly, so as to avoid stains in the entire production process from raw materials to shipment. From this, it can be seen that this A small request can take a lot of work to complete!

Next: Processing and production process of silicone kitchen utensils

 HomeNewsHow can silicone product manufacturers avoid stains in products

Dongguan Huayuan Electronic Technology Co., Ltd